The dimensions of the application area shall be discreetly taken by means of a miter by taking the miter allowance into consideration.
|
Window frame tips shall be determined adjusted to form a 45° angle by means of the miter.
|
Window frame, angle of which was specified by means of a miter shall be smoothly cut by a saw.
|
Adhesive shall be rubbed over the back of the window frame which will come to the surface.
|
Window frames which completed adhesive application shall be controlled with a balance and fixed to the surface by temporarily nailing.
|
The tips of the windowledge and crown profile shall be cut by an angle of 45°
|
Window frames which are cut are smoothly sticked.
|
Windowledger tips are elaborately adhered after being cut with an angle of 45° and gains an aesthetical appearance.
|
The windowledger with the tips cut are adhered to the surface and the implementation is completed. When the adhesive sticks firmly than the temporary nails are removed and mechanical fixing is fulfilled with Deco Set special window frame fixing plug.
|
Window frame profiles additional joints and window frame fixing plugs are repaired with Deco Set special repairment mortar.
|
The roughness which appears after the implementation of Deco Set special repairmen mortar are redressed by means of a brush.
|
The roughness of the dried repairmen mortar shall be removed by a fine sandpaper.
|
